Stone Enhancer

Purchase Stone Enhancer

• First coat deepens the stone's natural color while providing enhanced stain resistance.
• Second coat will begin to apply a light sheen or semi-gloss appearance. 
• Want a higher gloss?  Apply a third application.  Stone Enhancer allows you to dial in your stone's sheen.

Suitable for use on:

• Water resistance: 72 hours submersion without degradation. 
• Oil resistance: 72 hours resistance to salad oil.
• Household chemicals: Resists ammonia. vinegar. aliphatic paint thinners. alcohols & detergents.
• Color: 1 color garner. Nearly clear.
• Gloss: Initially high. Can easily be reduced with light buffing.
• Color effect: Saturates existing colors.
  Solids: T.S.
• Solvent type: A blend of aliphatic and aromatic hydrocarbons.
• Dry time: Highly dependent on temperature and humidity.
• Average values: Tack free in under two hours. Dry between four and six hours.
• Temperature window: 50 - 90 degrees F.
• Hardness: Sward greater than 30. Tg equivalent approx. 50. Overall hardness is affected by film thickness.

• Can be used on interior and exterior applications.

Directions & Coverage

1. Surface must be clean. dry and free of detergent and waxes. 
2. APPLICATION – Paint brush. paint pad. lambs wool applicator or sprayer. Rollers are not recommended.
3. Allow complete dry of previous coat before re-application.
4. Provide adequate ventilation during application and dry time.
   

Coverage: Approx. 400 s/ft.. per gallon

Purchase Stone Enhancer